The GT was designed by BLF, for BLF, and brought to life by top-tier manufacturer Lumintop. We trust it will serve you well in whatever your endeavors might be! Thank you for supporting this BLF community project. – the BLF GT project team 1800g, 2000 lumens, 1,290,000cd: This light outputs over 2000 lumens from a Cree XHP-35 High Intensity in Neutral White 4000k with a reflector that is huge to collect the light and propagate over 2000m of throw. Some people have claimed to hit over 3000m from real world tests with this light, that's how impressive it is. It will make you giggle on how impressive it is in size and throw illumination capability. By default the GT firmware is set to suit most users and applications, but several settings are user-configurable. To enter the configuration settings, press&hold the button for about 8 s (3 s if in the MODE-SET UI), do not release until a double flash followed by a single blink is seen. The single blink is the prompt for the first setting. Click the button as many times as required for that setting, or leave the setting alone and simply wait for the next double flash, this time followed by two blinks, indicating that we are now at setting #2, etc. The GT confirms each click with a blink. A press&hold skips to the next setting. A continuous press exits the setup menu completely. Four blinks indicate that the setup is completed. The settings differs, depending if the GT is currently set to the RAMPING UI or the MODE-SET UI. Note that changing setting 1 flips to the other UI and immediately kicks you into the table for that UI: Specifications: Emitter: 12V Cree XHP35 High Intensity,neutral white, mounted on copper DTP MCPCB ( 4000k neutral white) Flux: >2000 lm Intensity: >1 Mcd (ANSI throw >2000 m) Firmware: Tom E’s open-source NarsilM v1.2 User interface:  By default the GT is set to use the very intuitive Narsil smooth RAMPING UI. Instant access to a 2.5 A TURBO mode is also provided.  A more conventional discrete level MODE-SET UI is available as an alternative. Any one of 12 pre- defined mode-sets can be selected Driver: 35W, 2.5 A regulated buck driver with conversion efficiency that exceeds 90%. Parasitic drain while OFF is ~150 μA (~250 μA with button back-light on). Reflector: 118 mm ID, aluminum, smooth finish Lens: Glass with anti-reflective coating Body: Aluminum with Type III hard-coat anodizing Tripod socket: Standard 1/4 inch threaded (1/4-20 UNC) Button: Tactile with back-lit rubber boot Ingress rating: Equivalent to IP65, do not immerse in liquids Weight: Approximately 1.8 kg without cells Dimensions: 135 mm Ø head x 315 mm length Package List: 1 x Lumintop BLF GT Flashlight with 8 X Samsung 35E 3500mAh 18650 batteries 2 x O-rings 1 x User manual (English) ******This light ONLY works with 18650 top button unprotected batteries.
on all orders over $100
on all orders over $100